
Replacement Harbor Breeze Mazon Ceiling Fan Shade
This Harbor Breeze Beach creek fan has a 44 inch blade span, and comes complete with a brushed nickel finish, It has a LED light kit which comes with the fan. It “close mounts” to the ceiling which is similar to flush mount. You can use the downrod that comes with the fan to do a standard downrod mounting, or you can “close mount” to the ceiling. The fan also comes with a remote which will turn the fan or light kit on and off.
Although it may be a thought that light kits are common with fans, this is not always the case. Many fans do not actually come with a light kit. When they don’t come with a light kit, they also may not necessarily include a remote, either. This is important to understand.
The fan features a energy efficient light kit. Airflow is almost 4,000 CFM. This makes this fan a good pick for small rooms, but not for larger rooms as you might imagine. If you do want to have some good airflow in a larger room, look for a larger fan. 42 – 44 inch fans are generally for smaller spaces. Ceiling fans with a 46″ blade span or larger are good for larger rooms.
At around $150 USD, this Harbor Breeze fan comes in at a pretty affordable price point. You could likely afford to install two of these fans into the home. Not a bad price at all. The fan has only three blades though – just keep this in mind. It may move less air then a fan with five blades. It can also not be used with another bulb – the LED lighting is non-replaceable, so you can only use LED lighting with it, not other bulbs. These aren’t necessarily bad traits, depending on your use case. It’s likely just fine! For the average homeowner, these things don’t really matter that much. However, you may prefer a fan that has five blades as opposed to three – totally your call as a homeowner.
Having a touch screen on any piece of electronics is always helpful and improves visibility. With LCD remotes you can see everything the fan is doing, which only further improves visibility. LCD Displays add a digital overview of what all of the controls are currently set to.
When looking online for Harbor Breeze LCD ceiling fan remote controls, the problem is that they are difficult to find. There are not many that exist on the Internet for our site visitors to buy. We get asked from time to time, can you provide me with the LCD or touch screen ceiling fan remote for my Harbor Breeze. The model number is 0338739, as an example. We wish we could help with these inquiries, but we are not able to find many touch screen remote controls from Harbor Breeze that are available whatsoever. If you do know of a place we can acquire them, other than Home Depot please do feel free to let us know. Generally, Home Depot is probably your best bet. We hear all of the horror and war stories from people who have tried and tried to get parts from that retailer so we understand if you have tried and are having trouble. It’s completely understandable to get frustrated with them and look online in order to find a suitable replacement for your Harbor Breeze touch screen remote control.
Generally these remotes can operate up to 40 feet from the fan. Also, one important note is that these remotes do not always work with flushmount fans. Keep this in mind.
Not all ceiling fans are compatible with this type of remote control, so you need to check and make sure before purchase that it is compatible or not.
The Harbor Breeze Waveport ceiling fan is a residential fan with a light kit. The light kit comes with the fan, so you do not need to buy a light kit for the fan. This fan has a size of 52 inches in terms of the fan blade size. The finish is a lovely bronze. The 52 inch blades are palm style blades, so they will make you feel like you are living in a tropical paradise…even if well, you aren’t. Are any of us? I suppose some people are. The light kit features a single light. Standard mounting type – downrod style mounting, so if you’re looking for a low profile fan with no downrod, you’ll need to look for another fan. The fan is damp rated as well. This means that it can be used on porches and patios, which is pretty darn cool – don’t you think?
The fan also comes with two 60 watt candleabra bulbs. On the fan, there is a motor warranty which is a limited lifetime warranty. All other parts on this fan have a 1 year warranty. The fan itself has three speeds. In terms of the warranty, it is good that there is a limited lifetime on the motor so you know that if there is a motor defect it will be replaced under warranty. Keep in mind warranties don’t cover people to come to your house and do the work, so a new part is always helpful but you may need to learn how to install the part yourself, or pay a contractor.
The Harbor Breeze Centreville fan is a 5 blade fan with reversible blades, and a blade span of 42 inches. The fan is specifically designed to be used in rooms with ceilings that are low. The motor on the fan is powerful, and quiet. It creates high airflow while not producing a lot of noise output. The fan features three speeds, and with the reverse function you can run the fan the entire year.
In terms of measuring and figuring out if this fan will work for the room you are thinking of, the height from the ceiling to the bottom of the Centreville fan is almost 14 inches – 13.94 inches.
The Centreville has a traditional appeal, but can also work for the craftsman, too. The fan features two pull chains, so you can conveniently operate lights and fan speeds. This fan has a 52″ blade span, and is able to move 4,653 CFM of airflow. This makes the fan adapt well to larger rooms, up to 400 square feet in size. The finish is a white blonde, quite elegant.
If you’re having a problem with your ceiling fan remote, and you’ve read into what dipswitches are all about, then you’ve likely landed on this page. It is possible that your ceiling fan dipswitch is malfunctioning, or needs to be replaced. The first thing you need to understand about dipswitches with ceiling fans, is they are the programming between the remote and the receiver. Before even thinking about replacing dipswitch modules, you should ensure that they are set the same way on the remote as they are on the fan’s receiver module. The dip switch modules on either the receiver of the remote should be replaced as a very last resort.
Dipswitch modules may require replacement when you notice that they are no longer connected properly. Dipswitch modules have leads, where they are generally soldered into the receiver and the remote. Unless they are loose, they should not need to be replaced. It’s going to be a rare situation when you need to replace the dipswitches. With all of that being said, to replace dipswitches you will need to know how to solder. Dipswitches are generally soldered into the circuit board, much the same way as transistors or capacitors. The dipswitch module in itself is very inexpensive, and it’s not that difficult to solder another one in, as long as you know how to solder, desolder and check connections when you’re done.
If you’re not sure how to solder, or never done it before, you may want to consider replacing other components instead. E.g the remote can simply be replaced, and then make sure the ceiling fan dipswitch in the new remote is setup the same way as the dipswitches inside of the fan/receiver. Remotes are generally not too expensive. The cost of the remote of course is going to outweigh the few dollars you’d pay for a dipswitch. Dipswitches may be $5 or so, while remotes can be anywhere from $10-$50. It’s up to you to decide what remote you want, but also to ensure that the remote you purchase is compatible with your fan.
In a sweeping turn of events, a recall issue has been ordered on Harbor Breeze Santa-Ana ceiling fans. The headlines read “the defective blades can become dangerous projectiles”
The Harbor Breeze Santa-Ana ceiling fan
Model number is LP8294LBN
There is the possibility that your Santa Ana ceiling fan can develop a problem with the blade holder. The blade holders can develop cracks over time and potentially break, which leads to the blade shooting off from the fan. Therefore, the US Consumer Product Safety Commission has issued a recall on the fan blades. This does not mean every Santa Ana fan will have this problem, but due to the possibility of your fan having a blade go flying off, it’s best to simply adhere to the recall and replace the blade holders.
Look on the fan motor, inside of the remote control. If you see this model number: LP8294LBN, then you have this fan.
You can also identify this fan as it has two dark brown, curved blades, frosted white bulbs, and a blade arm holder in a brushed nickel finish.
If you have this fan, then the blade holders (or blade arms) need to be replaced – but not the entire fan.
Don’t go to the Lowe’s store. Call Harbor Breeze – the manufacturer, the phone number is 1-888-434-3797. Their hours of operation are between 8 am and 5 PM. You can also email recall@fanimation.com.
Update: April 16, 2021: Doing some recent research , it appears the number of fans that have been recalled are about 70,000. This information is subject to change also.
Please note, we are not the manufacturer and not able to assist with Harbor Breeze recalls. You need to talk directly to the manufacturer for this
The Harbor Breeze Builder Series Armory is a simple styled fan, and that’s what makes it elegant. This fan can be flush mounted, which is great for rooms with low ceilings. Sometimes a bedroom can have a low ceiling, or perhaps you have a vaulted design which means the ceiling slopes. Flush mount fans make effective use of the space by eliminating the downrod.
The four blades are reversible and come in either a white or light oak finish. The pure white fan, as mentioned is simple yet elegant. The Fan with light oak blades looks great with a metallic, modern finish for the light kit. Harbor Breeze offers a limited lifetime warranty.
The Harbor Breeze Armitage ceiling fan is a sleek, appealing ornate ceiling fan with a brushed nickel finish and an LED light kit. The brushed nickel finish appeals to many home owners and ceiling fan enthusiasts. It has a silver, metallic look to it that can go well with almost any kind of decor.
The Armitage can be mounted in a flush mount setting, which is excellent for bedrooms and rooms that may have a low ceiling. A 52 inch blade span means the fan will move lots of air around the room. Light kits are made of alabaster glass. Alabaster glass is often beautiful and perhaps a little more detailed than a simple frosted glass design. The light kit also has 6.5 watt LED bulbs, which means not only is the fan appealing and attractive, it’s also energy efficient. Due to the low cost of this fan, and the low energy cost associated with utilizing the light kit, the Armitage ceiling fan has a low total cost of ownership.
The Tilghman is a damp rated fan, so it works on the porch or patio. The blades on the Tilghman work quite well to create a palm tree effect, as the blades do look like a palm tree. Thus, the Tilghman really can start and complete the look of having a fan that works well in a humid location, and it will stand up to the elements outside like rain or humid temperatures.
For whatever reason, it appears there are many requests for Tilghman replacement blades. We do our best to help you to find the replacement Harbor Breeze Tilghman replacement fan blades. If you have been unsuccessful in finding the Tilghman ceiling fan blades at your local retailer, you may now be looking online to find a place to acquire replacement Tilghman fan blades. Of course, you’ll want to ensure the fan blades are the right size first. Most of these fans that we run across, are 52″ blade spans. If you purchased your Tilghman with 52 inch fan blades, then this is relevant to your fan.
Although the Tilghman looks very sophisticated, the simplicity of the Tilghman is likely what attracts many homeowners and fan enthusiasts. There are three speeds. One of the things you should know about this fan is that Lowe’s describes it as “light kit adaptable” and “remote control adaptable.” This means that the fan likely does not come with either of these parts. It’s important to understand also that “remote control adaptable” may not necessarily mean you can simply purchase a remote and program it via dip switch settings to the fan. It is possible that an actual receiver needs to be purchased and installed into the fan. Be sure to ask the local retailer if you are considering purchasing a Tilghman fan. You’re welcome to post questions related to the Tilghman on our forums as well. If we don’t know the answer, other site visitors may be able to help.